I02: Intervention of a photocell At the start of a maneuver or during the movement, one or more photocells are blocked.
Resolution: Check for and clear any obstacles in the path of the photocell. Any device connected to an input programmed as "Photo" should be checked.
I03: Intervention of the motor force limiter during the movement. The boom experienced excessive friction or current draw.
Resolution: Verify the cause or increase the force level. If new install, check for proper spring placement.
I04: Intervention of the devices connected to the STOP input at the start of the maneuver or during the movement itself. The device(s) connected to the STOP input intervened.
Resolution: Identify device connected to the STOP input, and ensure wiring is correct. “Normally Closed” and “Normally Open” contacts, as well as constant resistance devices, can be connected on the input. The board must detect the new device on the STOP input. Using the scroll wheel find the "Set" setting and click in on the scroll wheel. On the number "1", click in the scroll wheel again to relearn the STOP input(s).