While talking with our Technical Support team or registering your warranty you will need the serial number of the equipment you are working on. Here is how to find it.
Control Boxes
- CBOX1050, CBOX936, CBOX636, inside the enclosure on the side wall
Swing gate operators
- SwingSmartCNX, on the left side of the back cover and inside on the chassis left side under the shelf
- 816, on the main housing of the actuator arm
- 912 (A.KA. Titan), on the top of the flange near the pivot bolt
- SwingSmart, on the right side of the chassis under the cover and on the side of the back cover
- HydraSwing, on the end of the operator housing
Slide gate operators
- SlideSmartCNX, on the left side of the back cover and inside on the chassis left side under the shelf
- Slide Driver, on the end of the operator above the warning sticker
- SlideSmart, on the small white label on the chassis and inside the electrical box near the switches.
- SlideSmartHD, left side of the housing
- Vanguard 3501, on the inside chassis, and on the end of the cover
- 7251, on the left side of the enclosure
- 7351, on the right side of the enclosure, and on a small white label inside the operator above the terminal block
Barrier arm gate operators
- MBAR/LBAR, on the back of the operator above where the arms connect. the arm hub may have to be removed. The bottom line on the label is the serial number. A.K.A. "Production" (highlighted below)
- StrongArmPark, on the left side of the operator and inside the door
- StrongArm M30/M50, on the back of the pivot post, and on the reservoir for the pump
Lift gate operators
- SwingRiser, engraved on the cover mounting flange of the pedestal
Power Supplies
- AC and DC Power Supply, on the top shelf inside of the enclosure
Hydraulic Supplies
- HydraSupply, on the front of the enclosure