1050 board setup for two gates, as follows..
Programming on the first 1050 board:
Functions >Radio channel 1 – “Step”
Functions >Radio channel 2 –“ No Program”
Programming on the second 1050 board:
Functions >Radio channel 1 – “No Program”
Functions >Radio channel 2 – “Step”
This makes it so the top button on a two button remote operates gate 1 and the bottom button operates gate 2.
936 board setup for two gates, as follows..
Programming on the first 936 board:
Press “Options”, then down arrow to “RC”, press “Ok” and set to – “1”
Programming on the second 936 board:
Press “Options”, then down arrow to “RC”, press “Ok” and set to – “2”
This makes it so the top button on a two button remote operates gate 1 and the bottom button operates gate 2.