Applies to 1050 board Only: The radio channel needs to be setup so that after the remotes are paired and you get the 3 flashes from receiver, the board knows what actions you want to happen.
1: Press the "Functions "button
2: Scroll down to "Radio Channel" press OK. (Should read, "Radio Ch1- invalid/no program".) Radio CH1 is the first button on the remote. If you wish to change actions on other buttons scroll up to the coordinating radio channel. Example: 1st button is Ch1, 2nd button is CH2.....and so on.
3: Press "OK" to make the word "Invalid" flash.
4: Scroll up to "STEP" or the action you want and press "OK"
5: Press "DISPLAY" then "OK" to escape.